Binatone SI-4024 Bedienungsanleitung PDF herunterladen (Seite 8)

CARE AND MAINTENANCE

Cleaning of the sole plate

! Do not use any abrasive substances and

materials to clean the sole plate.

Cleaning of internal parts of the

appliance

SI-4024 iron is equipped with an anti-scale function which

protects it from an accumulation of scale: it does this with a built-in

permanent filter. Therefore the water hardness is reduced and

the useful service life of the iron is extended.

Warning: In areas with very hard water it is recommended

that you regularly remove scale from the appliance to

maintain it in good working order. Excess lime scale

may result in damage or malfunction of your product.

If in your area the water is soft and you have average amounts

of clothes to be ironed then we recommend you to de-scale every

month. If the water in your area is very hard or if you iron fre-

quently, then we recommend you de-scale more often.

Your iron has a self-cleaning function, which allows you to

clean the internal parts of the appliance from scale or dust. To use

this function perform the following procedure:

1. Set the steam control knob (9) into the «0» position.

2. Fill the tank (5) with water to the «Max» «Self-Clean» level.

3. Place the iron in a vertical position and plug it into the mains

supply outlet.

4. Set the temperature control knob (10) into the «Max» posi-

tion. The temperature indicator (12) will light up showing that

the iron is being heated to the desired temperature.

5. When the iron reaches the maximum temperature, the indica-

tor (12) will go out.

6. Disconnect the iron from the main supply outlet. Whilst holding

the appliance horizontally over a sink, press the self-clean

knob «Self-Clean» (6). Hot steam will discharge from the sole

plate (13) removing the scale and dust.

7. When the water tank (5) is completely empty, release the

«Self-Clean» knob (6).

8. Put the appliance into a vertical position and re-heat the iron.

9. To complete the cleaning process; Iron a piece of a clean old

cotton cloth in order to clean the sole plate (13) of any re-

maining dust and scale and to evaporate the remaining water.

When you have finished ironing, always switch the appliance

off and disconnect from the electrical supply.

Storage

Before storing the iron, make sure it is disconnected from the

mains supply outlet and is completely cooled down. Set the tem-

perature control knob into the «Min» position and the steam control

knob into the «0» position. Drain the remaining water from the tank

(5) by opening the cover (4) and holding the iron upside down

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Binatone SI-4024 Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Eisen Binatone SI-4024